Additel 760 Automatic Handheld Pressure Calibrator

• Fully automatic calibrator with built-in pump and controller

• Switchable internal pressure modules for expandable ranges

• Accuracy (1 year) of 0.02%FS

• External pressure modules available (measure only)

• Less than 4 lbs (1.8 kg) for handheld operation

• Source pressure, measure pressure and electrical

• 4 channels

• Optional HART communications

• Optional data logging and task documenting

• USB, Wi-Fi, and Bluetooth communications

• ISO 17025-accredited calibration w/data included

A portable automated pressure calibrator in the palm of your hand—this could be our most exciting product yet! The Additel 760 series Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less than 4 lbs (1.8 kg), the ADT760’s innovative design contains a built-in pump, precision pressure sensor, internal controller and a large touch-screen color display. To generate pressure, simply key in the desired pressure and the Additel 760 will do the rest. Each unit has four channels: one internal pressure channel for source and measure pressures, two external pressure measurement channels, and one electronic measure and source channel. This series of calibrator has three standard models with the option of adding HART communications, documentation and data logging.

ADT760-D

The 760-D gives you differential and gauge pressure but at a higher pressure range than the ADT760-LLP. Covering the range of -12.5 to 35 psi (-0.86 to 2.5 bar) and with an accuracy of 0.02%FS, the ADT760-D is an ideal solution to cover very common gauge and differential pressure measurements. The Additel 760-D comes with an internal module covering its full range, but lower pressure configurations down to ±10 inH2O differential can be purchased to improve accuracy at lower pressures.

Documenting Process Functionality

Each model of the Additel 760 series has an option incorporating documentation and communication functions turning your 760 into a multifunction documenting process calibrator. This feature provides HART communication, task documentation and data logging.

• Gauge calibration for differential and gauge type pressures

• Low pressure calibration

• Transmitter calibration for absolute and gauge type pressures

• Switch calibration for absolute and gauge type pressures

• HART-smart transmitter calibration ( -DL version only )

• Pressure monitoring and data logging (-DL version only

Pressure Specification
Max Pressure Range	-12.5 to 35 psi (-0.86 to 2.5 bar)
Accuracy	0.02% FS
Stability	<0.005% FS
Pressure Type	Differential, Gauge
Over Range Indication	1.2
Resolution	6 digits
Measurement Units	Pa, hPa, kPa, mPa, bar, mbar, msi, mmHg @ 0°C, cmHg @ 0°C, mHg @ 0°C, inHg @ 0°C, inH2O @ 4°C, mmH2O @ 4°C, cmH2O @ 4°C, mH2O @ 4°C, inH2O @ 20°C, mmH2O @ 20°C, cmH2O @ 20°C, mH2O @ 20°C, inH2O @ 68°C, kg/m2, mtorr, torr, lb/ft2, tsi, custom
Connection	Hose, 5 ft (1.5 m), with built-in filter to 1/4BSPF, 1/4NPTF, and M20F adapters
Pressure Output Rate	<10 Seconds (35 psi/5 ml)

Selection Guide - Differential Pressure
Module	Module Range[6]		Media	Accuracy (%FS)[1]	Burst Pressure	760-LLP	760-D	760-MA
Module	inH2O	mbar	Media	Accuracy (%FS)[1]	Burst Pressure	760-LLP	760-D	760-MA
DP025	±0.25	±0.62	G	0.2[2]	100x	•
DP050	±0.5	±1.25	G	0.1[3]	100x	•
DP1	±1	±2.5	G	0.05[4]	100x	•
DP2	±2	±5	G	0.05[4]	100x	•
DP5	±5	±10	G	0.05[4]	50x	•
DP10	±10	±25	G	0.05[4]	20x	•	•
DP20	±20	±50	G	0.05	20x	•	•
DP30	±30	±75	G	0.05	20x	•	•
DP50	±50	±160	G	0.05	3x		•
DP100	±100	±250	G	0.02	3x		•
DP150	±150	±350	G	0.02	3x		•
DP300	±300	±700	G	0.02	3x		•
DP400	-380 to 400	-950 to 1K	G	0.02	3x		•
DP800	-380 to 800	-950 to 2K	G	0.02	3x		•
DP1K	-380 to 1K	-950 to 2.5K	G	0.02	3x		•
[1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules.
[2] Accuracy is a 6 months spec, 1-year long-term drift is 0.2%FS.
[3] Accuracy is a 6 months spec, 1-year long-term drift is 0.1%FS
[4] Accuracy is a 6 months spec, 1-year long-term drift is 0.05%FS.
[5] Specification based on gauge measurement. An additional 60 pa uncertainty will need to be included when measuring in absolute mode. Applicable only for use with the ADT760-MA
[6] The low module pressure range may be outside the pressure range of the calibrator

Selection Guide - Gauge Pressure
Module	Module Range[6]		Media	Accuracy (%FS)[1]	Burst Pressure	760-LLP	760-D	760-MA
Module	psi	bar	Media	Accuracy (%FS)[1]	Burst Pressure	760-LLP	760-D	760-MA
CP10	±10	±0.7	G	0.02[5]	3x		•	•
CP15	-13.5 to 15	-0.95 to 1	G	0.02[5]	3x		•	•
CP30	-13.5 to 30	-0.95 to 2	G	0.02[5]	3x		•	•
CP35	-13.5 to 35	-0.95 to 2.5	G	0.02[5]	3x		•	•
CP50	-13.5 to 50	-0.95 to 3.5	G	0.02[5]	3x			•
CP100	-13.5 to 100	-0.95 to 7	G	0.02[5]	3x			•
CP150	-13.5 to 150	-0.95 to 10	G	0.02[5]	3x			•
CP200	-13.5 to 200	-0.95 to 14	G	0.02[5]	3x			•
CP300	-13.5 to 300	-0.95 to 20	G	0.02[5]	3x			•
[1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules.
[2] Accuracy is a 6 months spec, 1-year long-term drift is 0.2%FS.
[3] Accuracy is a 6 months spec, 1-year long-term drift is 0.1%FS
[4] Accuracy is a 6 months spec, 1-year long-term drift is 0.05%FS.
[5] Specification based on gauge measurement. An additional 60 pa uncertainty will need to be included when measuring in absolute mode. Applicable only for use with the ADT760-MA
[6] The low module pressure range may be outside the pressure range of the calibrator

Module	Module Range		Media	Accuracy (%FS)[1]	Burst Pressure
Module	psi	bar	Media	Accuracy (%FS)[1]	Burst Pressure
CP10	±10	±0.7	G	0.02[5]	3x
CP15	-13.5 to 15	-0.95 to 1	G	0.02[5]	3x
CP30	-13.5 to 30	-0.95 to 2	G	0.02[5]	3x
CP35	-13.5 to 35	-0.95 to 2.5	G	0.02[5]	3x
CP50	-13.5 to 50	-0.95 to 3.5	G	0.02[5]	3x

Electrical Specification
	Range	Resolution	Accuracy	Note
mA Measure	±30 mA	0.0001 mA	0.01%RD+0.005%FS	Impedance<10Ω
V Measure	±30 V	0.0001 V	0.01%RD+0.005%FS	Impedance >1MΩ
mA Source	24 mA	0.001 mA	0.01%RD+0.005%FS	20 mA @ 1K
Loop Power Source	24 V	N/A	±1 V	50 mA (Max Loading)
Pressure Switch	Open, close. Support for mechanical switches and NPN/PNP digital switches.
Temperature Compensation	41°F to 95°F (5°C to 35°C)
Temperature Coefficient	< ± ( 0.001%RD + 0.001%FS ) / °C outside of 5°C to 35°C

General Specifications
Specification	Description
Channels	Four total: one electrical, one internal pressure, two external pressure (measure only)
Enclosure IP Rating	IP52 water and dust proof
Battery	Rechargeable Li-Ion battery, typically 10 hours of operation, recharges in less than 4 hours
Display	Color 800 x 480 TFT 5-inch touch screen
Communications	USB, WiFi, Bluetooth
Weight	<4 lbs (<1.8 kg)
Size	9.3 x 4.3 x 2.8 in (235 x 110 x 70 mm)
Certification	ISO17025 accredited certificate with data included
HART Communications	Optional (ADT760-X-DL model)
Data Logging	Optional (ADT760-X-DL model), up to 1,000,000 readings (date and time stamped)
Task Documentation	Optional (ADT760-X-DL model) up to 1000 tasks
Automation Functions	Switch test, auto step, leak test
Misuse Protection	Up to 30 V on any two sockets
Multi Lingual Interface	English, German, French, Italian, Spanish, Portuguese, Chinese, Japanese, and Russian
Pump Life	>500,000 cycles
Power	Rechargeable Li-Ion battery, external power: 110/220 V power adapter 10 V
Environment Specifications	Operation: 32°F to 122°F (0°C to 50°C), 0-90% RH, less than 3,000 meters Compensated temperature: 32°F to 122°F (0°C to 50°C) Storage temperature: -4°F to 158°F (-20°C to 70°C)
Vibration and Shock	Vibration: 4g (20 to 2,000 Hz) Shock: 8g, 1 meter drop test
Compliance	CE
Software	ACal, PCal, Land, LogII
Warranty	1 year

Documents:

File name	Upload Date	Size
Additel 760 Automatic Handheld Pressure Calibrator Datasheet	2018.3.27	1.2 MB
Additel 760 Automatic Handheld Pressure Calibrator User Manual	2019.3.11	3.1 MB
Additel 760 Series Firmware Update Information	2019.4.15	0.2 MB
Additel 760 Selection Guide	2019.5.21	0.1 MB