Pressure / Process Calibration Equipment
01
Corporate Headquarters
2900 Saturn Street #B
Brea, CA 92821, USA
Salt Lake City Office
1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA
Phone: 714-998-6899 Email: sales@additel.com
Rev # 20240415
Automatic Handheld Pressure Calibrators
Selection Guide
Additel 760
[1] FS specication applies to the span of the module range.
[2] Stability based on FS of the internal pressure module. Internal module is switchable.
[3] Specication based on gauge measurement. An additional 55 pa uncertainty will need to be included when measuring in absolute mode.
Model
Features
760-LLP 760-LLP-DL 760-D 760-D-DL 760-MA 760-MA-DL
Pressure
Range
[1]
±30 in H
2
O
(±75 mbar)
±30 in H
2
O
(±75 mbar)
-12.5 to 35 psi
(-0.86 to 2.5 bar)
-12.5 to 35 psi
(-0.86 to 2.5 bar)
-12.5 to 300 psig
(-0.86 to 20 bar)
-12.5 to 300 psig
(-0.86 to 20 bar)
Accuracy (%FS) 0.05
[1]
0.05
[1]
0.02%FS
[1]
0.02%FS
[1]
0.02%FS
[1][3]
0.02%FS
[1][3]
Stability (%FS) 0.005
[2]
0.005
[2]
0.005
[2]
0.005
[2]
0.005
[2]
0.005
[2]
Gauge Pressure
• • • • • •
Differential Pressure
• • • •
Absolute Pressure
• •
Barometric Pressure
• •
Removable Internal
Module
• • • • • •
External Pressure
Module
• • • • • •
Temperature
Compensated
• • • • • •
Built-in Electrical Pump
• • • • • •
Built-in Filter
• • • • • •
Built-in Liquid Trap
• • • • • •
Source/Simulate 24 mA
• • • • • •
Measure mA or V
• • • • • •
24V Loop power
• • • • • •
Pressure switch test
• • • • • •
HART Communication
• • •
Task Documentation
• • •
Data Logging
• • •
Channels
4 4 4 4 4 4
Bluetooth
,
Wi-Fi and
USB
• • • • • •
02
Corporate Headquarters
2900 Saturn Street #B
Brea, CA 92821, USA
Salt Lake City Office
1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA
Pressure / Process Calibration Equipment
Phone: 714-998-6899 Email: sales@additel.com
Rev # 20240415
Automatic Handheld Pressure Calibrators
Additel 760
OVERVIEW
Fully automatic calibrator with built-in pump and controller
Switchable internal pressure modules for expandable ranges
Accuracy (1 year) of 0.02%FS
External pressure modules available (measure only)
Less than 4 lbs (1.8 kg) for handheld operation
Source pressure, measure pressure and electrical
4 channels
Optional HART communications
Optional data logging and task documenting
Bluetooth, Wi-Fi and USB communications
A portable automated pressure calibrator in the palm of your hand—this could be
our most exciting product yet! The Additel 760 series Automatic Handheld Pressure
Calibrator takes portable pressure calibration to new levels. Weighing less than 4 lbs
(1.8 kg), the ADT760’s innovative design contains a built-in pump, precision pressure
sensor, internal controller and a large touch-screen color display. To generate
pressure, simply key in the desired pressure and the Additel 760 will do the rest.
Each unit has four channels: one internal pressure channel for source and measure
pressures, two external pressure measurement channels, and one electronic measure
and source channel. This series of calibrator has three standard models with the option
of adding HART communications, documentation and data logging.
Pressure / Process Calibration Equipment
03
Corporate Headquarters
2900 Saturn Street #B
Brea, CA 92821, USA
Salt Lake City Office
1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA
Phone: 714-998-6899 Email: sales@additel.com
Rev # 20240415
FEATURES
Pressure Specifications
Electrical Specifications
ADT760-LLP
The 760-LLP is designed for low pressure calibration and comes with a build-in pressure module of your choice. The
maximum range module compatible with the ADT760-LLP is to ±30 inH2O (±75 mbar) and provides an accuracy to
0.05%FS (see ordering information for configurations with the option of the ADT760 and a module of your choice).
Additional internal pressure modules (ADT155 series) are available and provide a variety of ranges down to ±0.25
inH
2
O (±0.62 mbar). The accuracy of 0.05%FS and control stability 0.005%FS is based on the internal module’s span.
Measurements can be made in gauge or differential mode.
ADT760-D
The 760-D gives you differential and gauge pressure but at a higher pressure range than the ADT760-LLP. Covering the
range of -12.5 to 35 psi (-0.86 to 2.5 bar) and with an accuracy of 0.02%FS, the ADT760-D is an ideal solution to cover
very common gauge and differential pressure measurements. The Additel 760-D comes with an internal module of your
choice. The maximum range module compatible with the ADT760-D is to 35 psi. Lower pressure
configurations down to ±10 inH
2
O differential can be purchased to improve accuracy at lower
pressures.
ADT760-MA
The 760-MA generates and controls pressure from vacuum pressures up to 300 psig (20 bar.g)
with an accuracy of 0.02%FS
.
Equipped with a built-in barometric reference, each unit can switch
between gauge and absolute pressure types. A variety of internal sensors are available which
offer lower pressure ranges for improved performance.
Documenting Process Functionality
Each model of the Additel 760 series has an option incorporating documentation and communication functions turning
your 760 into a multifunction documenting process calibrator. This feature provides HART communication, task
documentation and data logging.
Specification 760-LLP 760-D 760-MA
Max Pressure Range
±30 inH
2
O
(75 mbar)
-12.5 to 35 psi
(-0.86 to 2.5 bar)
-12.5 to 300 psig
(-0.86 to 20 bar.g)
Accuracy
0.05%FS
[1]
0.02%FS
[1]
0.02%FS
[1][3]
Stability 0.005%FS
[2]
0.005%FS
[2]
0.005%FS
[2]
Pressure Type Differential, Gauge Differential, Gauge Gauge, Absolute
Over Range Indication 120%
Resolution 6 digits
Measurement Units
Pa, hPa, kPa, mPa, bar, mbar, psi, mmHg@0°C, cmHg@0°C, mHg@0°C, inHg@0°C, inH
2
O@4°C, mmH
2
O@4°C,
cmH
2
O@4°C, mH
2
O@4°C, mmH
2
O@20°C, cmH
2
O@20°C, mH
2
O@20°C, mH2O@68°F, inH
2
O@20°C, kgf/cm2, mtorr, torr, lb/
ft2, tsi, custom
Barometric Accuracy N/A N/A 55 Pa
[4]
Connection Barb tting
Hose, 5 ft (1.5 m), with built-in lter to
1/4BSPF, 1/4NPTF, and M20F adapters
Hose, 5 ft (1.5 m), with built-in lter to
1/4BSPF, 1/4NPTF, and M20F adapters
Pressure Output Rate <30 Seconds (30 inH
2
O / 100 ml) <10 Seconds (35 psi / 5 ml) <90 Seconds (300 psi / 5 ml)
Specification Range Resolution Accuracy Note
mA Measure ± 30 mA 0.0001 mA 0.01%RD + 1.5 μA Impedance <10 Ω
V Measure ± 30 V 0.0001 V 0.01%RD + 1.5 mV Impedance >1 MΩ
mA Source 24 mA 0.001 mA 0.01%RD + 1.2 μA 20 mA @ 1 K
Loop Power Source 24 V N/A ± 1 V 50 mA (Max Loading)
Pressure Switch Open, close. Support for mechanical switches and NPN/PNP digital switches.
Temperature Compensation 8 °C to 38 °C
Temperature Coefficient < ± ( 0.001%RD + 0.001%FS ) / °C outside of 8°C to 38°C
[1] FS specication applies to the span of the module range.
[2] Stability based on FS of the internal pressure module. Stability is 0.005%FS or 0.05 pa whichever is greater. Internal module is switchable.
[3] Specication based on gauge measurement. An additional 55 pa uncertainty will need to be included when measuring in absolute mode.
[4] 55 Pa uncertainty (k=2) includes calibration uncertainty, linearity, and long-term stability (<30 Pa per year). Barometer range of 60 to 110 kPa.
04
Corporate Headquarters
2900 Saturn Street #B
Brea, CA 92821, USA
Salt Lake City Office
1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA
Pressure / Process Calibration Equipment
Phone: 714-998-6899 Email: sales@additel.com
Rev # 20240415
Internal Modules Specifications and Compatibility
Module
Module Range
[6]
Media
Accuracy
(%FS)
[1]
Burst
Pressure
760-LLP 760-D 760-MA
inH
2
O mbar
DP025 ±0.25 ±0.62 G 0.2
[2]
100x
•
DP050 ±0.5 ±1.25 G 0.1
[3]
100x
•
DP1 ±1 ±2.5 G 0.05
[4]
100x
•
DP2 ±2 ±5 G 0.05
[4]
100x
•
DP5 ±5 ±10 G 0.05
[4]
50x
•
DP10 ±10 ±25 G 0.05
[4]
20x
• •
DP20 ±20 ±50 G 0.05 20x
• •
DP30 ±30 ±75 G 0.05 20x
• •
DP50 ±50 ±125 G 0.05 3x
•
DP100 ±100 ±250 G 0.02 3x
•
DP150 ±150 ±350 G 0.02 3x
•
DP300 ±300 ±700 G 0.02 3x
•
DP400 -380 to 400 -950 to 1K G 0.02 3x
•
DP800 -380 to 800 -950 to 2K G 0.02 3x
•
DP1K -380 to 1K -950 to 2.5K G 0.02 3x
•
Gauge
Pressure
psig bar.g
CP10 ±10 ±0.7 G 0.02
[5]
3x
• •
CP15 -13.5 to 15 -0.95 to 1 G 0.02
[5]
3x
• •
CP30 -13.5 to 30 -0.95 to 2 G 0.02
[5]
3x
• •
CP35 -13.5 to 35 -0.95 to 2.5 G 0.02
[5]
3x
• •
CP50 -13.5 to 50 -0.95 to 3.5 G 0.02
[5]
3x
•
CP100 -13.5 to 100 -0.95 to 7 G 0.02
[5]
3x
•
CP150 -13.5 to 150 -0.95 to 10 G 0.02
[5]
3x
•
CP200 -13.5 to 200 -0.95 to 14 G 0.02
[5]
3x
•
CP300 -13.5 to 300 -0.95 to 20 G 0.02
[5]
3x
•
[1] FS specication applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules.
[2] Accuracy is a 6 months spec, 1-year long-term drift is 0.2%FS.
[3] Accuracy is a 6 months spec, 1-year long-term drift is 0.1%FS.
[4] Accuracy is a 6 months spec, 1-year long-term drift is 0.05%FS.
[5] Specication based on gauge measurement. An additional 55 pa uncertainty will need to be included when measuring in absolute mode. Applicable
only for use with the ADT760-MA
[6] The low module pressure range may be outside the pressure range of the calibrator
* ADT155 Pressure Modules are calibrated in psi & inH2O
Pressure / Process Calibration Equipment
05
Corporate Headquarters
2900 Saturn Street #B
Brea, CA 92821, USA
Salt Lake City Office
1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA
Phone: 714-998-6899 Email: sales@additel.com
Rev # 20240415
General Specifications
Specification Description
Channels
Four total: one electrical, one internal pressure, two
external pressure (measure only)
Enclosure IP Rating IP52 water and dust proof
Battery
Rechargeable Li-Ion battery, typically 10 hours of
operation, recharges in less than 4 hours
Display Color 800 x 480 TFT 5-inch touch screen
Communications Bluetooth, WiFi and USB
Weight <4 lbs (<1.8 kg)
Size 9.3 x 4.3 x 2.8 in (235 x 110 x 70 mm)
Certification ISO 17025 accredited certicate with data included
HART Communications Optional (ADT760-X-DL model)
Data Logging
Optional (ADT760-X-DL model), up to 1,000,000
readings (date and time stamped)
Task Documentation Optional (ADT760-X-DL model) up to 1000 tasks
Automation Functions Switch test, auto step, leak test
Misuse Protection Up to 30 V on any two sockets
Multi Lingual Interface
English, German, French, Italian, Spanish, Portuguese,
Chinese, Japanese, and Russian
Pump Life >500,000 cycles
Power
Rechargeable Li-Ion battery, external power: 110/220 V
power adapter 10 V
Environment Specifications
Operation: 32°F to 122°F (0°C to 50°C), 0-90% RH,
less than 3,000 meters
Compensated temperature: 32°F to 122°F (0°C to 50°C)
Storage temperature: -4°F to 158°F (-20°C to 70°C)
Vibration and Shock
Vibration: 4 g (20 to 2,000 Hz)
Shock: 8 g
Compliance CE
Software ACal, Land, LogII
Warranty 1 year
Hose & Filter End of Life
The estimated End of Life (EOL) expectancy for all
accessory hoses and lters (pneumatic and
hydraulic) is approximately 10 years and should be
replaced at the rst sign of wear or damage.
* ADT155 Pressure modules are calibrated in psi & inH2O
Optional Internal Pressure Modules
Module Number Description
ADT155-20-DP025
Pressure module for ADT760-LLP, ±0.25 inH
2
O,
±0.2%FS
ADT155-10-DP050 Pressure module for ADT760-LLP, ±0.5 inH
2
O, ±0.1%FS
ADT155-05-DP1 Pressure module for ADT760-LLP, ±1 inH
2
O, ±0.05%FS
ADT155-05-DP2 Pressure module for ADT760-LLP, ±2 inH
2
O, ±0.05%FS
ADT155-05-DP5 Pressure module for ADT760-LLP, ±5 inH
2
O, ±0.05%FS
ADT155-05-DP10
Pressure module for ADT760-LLP & -D ±10 inH
2
O,
±0.05%FS
ADT155-05-DP20
Pressure module for ADT760-LLP & -D, ±20 inH
2
O,
±0.05%FS
ADT155--05-DP30
Pressure module for ADT760-LLP & -D, ±30 inH
2
O,
±0.05%FS
ADT155-05-DP50 Pressure module for ADT760-D, ±50 inH
2
O, ±0.05%FS
ADT155-02-DP100
Pressure module for ADT760-D, ±100 inH
2
O, ±0.02%FS
ADT155-02-DP150 Pressure module for ADT760-D, ±150 inH
2
O, ±0.02%FS
ADT155-02-DP300 Pressure module for ADT760-D, ±300 inH
2
O, ±0.02%FS
ADT155-02-DP400
Pressure module for ADT760-D, -380 to 400 inH
2
O
(-13.5 to 15 psi), ±0.02%FS
ADT155-02-DP800
Pressure module for ADT760-D, -380 to 800 inH
2
O
(-13.5 to 30 psi), ±0.02%FS
ADT155-02-DP1K
Pressure module for ADT760-D, -380 to 1K inH
2
O (-13.5
to 35 psi), ±0.02%FS
ADT155-02-CP10
Pressure module for ADT760-D & -MA, ±10 psi,
±0.02%FS
ADT155-02-CP15
Pressure module for ADT760-D & -MA, -13.5 to 15 psi,
±0.02%FS
ADT155-02-CP30
Pressure module for ADT760-D & -MA, -13.5 to 30 psi,
±0.02%FS
ADT155-02-CP35
Pressure module for ADT760-D & -MA, -13.5 to 35 psi,
±0.02%FS
ADT155-02-CP50
Pressure module for ADT760-D & -MA, -13.5 to 50 psi,
±0.02%FS
ADT155-02-CP100
Pressure module for ADT760-MA, -13.5 to 100 psi,
±0.02%FS
ADT155-02-CP150
Pressure module for ADT760-MA, -13.5 to 150 psi,
±0.02%FS
ADT155-02-CP200
Pressure module for ADT760-MA, -13.5 to 200 psi,
±0.02%FS
ADT155-02-CP300
Pressure module for ADT760-MA, -13.5 to 300 psi,
±0.02%FS
06
Corporate Headquarters
2900 Saturn Street #B
Brea, CA 92821, USA
Salt Lake City Office
1364 West State Rd. Suite 101
Pleasant Grove, UT 84062, USA
Pressure / Process Calibration Equipment
Phone: 714-998-6899 Email: sales@additel.com
Rev # 20240415
* Additel/Land software available for free download at www.additel.com
Optional Accessories
Model Description Picture
ADT161
See datasheet of ADT161
for more info; connection
cable sold separately
9060
Pressure module
connection cable
ADT100-760-N
Special Connector
to 1/4NPT quick connector
ADT100-760-B
Special Connector
to 1/4BSP quick connector
ADT100-760-M
Special Connector
to M20x1.5 quick connector
ADT100-760-N2
Special Connector
to 1/2NPT quick connector
ADT100-760-B2
Special Connector
to1/2BSP quick connector
ADT128-B
Pneumatic Pressure Manifold
for ADT760, -15 to 1000 psi,
single port, 1/4 BSP F
ADT128-B2
Pneumatic Pressure Manifold
for ADT760, -15 to 1000 psi,
single port, 1/2 BSP F
ADT128-N
Pneumatic Pressure Manifold
for ADT760, -15 to 1000 psi,
single port, 1/4 NPT F
ADT128-N2
Pneumatic Pressure Manifold
for ADT760, -15 to 1000 psi,
single port, 1/2 NPT F
ADT128-M
Pneumatic Pressure Manifold
for ADT760, -15 to 1000 psi,
single port, M20x1.5
9240A
DP gauge holder with a built-
in 80 ml chamber
1220211087 Filter, set of 1 pc
9913-760-SC
Soft carrying case for
ADT760, test leads, and
many accessories
9914-760
Carry case for ADT760 and
various accessories
ADT100-760-CNT
Special connector (to be used
to adapt from the ADT760 to
ADT100-760-KIT adapters)
Ordering Information
Model Type
Model Number Description
ADT760-LLP
Automatic Handheld Pressure Calibrator,
±30 inH
2
O
ADT760-LLP-DL
Automatic Handheld Pressure Calibrator,
±30 inH
2
O w/HART and data logging
ADT760-D
Automatic Handheld Pressure Calibrator,
-12.5 to 35 psi
ADT760-D-DL
Automatic Handheld Pressure Calibrator,
-12.5 to 35 psi w/HART and data logging
ADT760-MA
Automatic Handheld Pressure Calibrator,
-12.5 to 300 psi
ADT760-MA-DL
Automatic Handheld Pressure Calibrator,
-12.5 to 300 psi w/HART and data logging
02 - 0.02% full span
05 - 0.05% full span
10 - 0.1% full span
20 - 0.2% full span
ADT760
02
Model Number
DL
DL: Data logging
CP100
Internal Pressure Module Range:
See Optional Internal Pressure
Model table.
* Congurations available for ADT760 units with different internal pressure
sensor range
Accessories (Included)
Model Quantity Picture
ADT100-760-KIT
adapter set
(excl ADT760-LLP)
1 set
(to 1/4BSPF, to 1/4NPTF, to
M20F)
USB to USB cable
(ADT760-X-DL only)
1 pc
9816-X 110V / 220V
external power adapter
1 pc
9724 chargeable Li-ion
battery
1 pc
9025 test leads
for calibrator
1 sets (3 pcs)
ADT100-760 Hose 1 pc for the ADT760-MA
Pressure Hose
1 pc for the ADT760-D
Silicone Tube
2 meters for the ADT760-LLP
1 meter for the ADT760-D
1220211206
Adapter,
quick female to barb
(Only for ADT760-D)
1 pc
ISO17025
accredited certificate
1 pc
MA
Pressure range:
See Model Type table
