Sourcing, simulating and measuring temperature and electrical
signals
Sources and measures mV, mA, ohms, RTDs,
thermocouples, frequency, and pulses
Simulates and measures 13 thermocouples and 11
RTDs to calibrate transmitters
Measures and sources pressure using Additel 160A
series Intelligent Digital Pressure Modules from -15 psi
to 10,000 psi (-1 bar to 700 bar)
24V loop power supply
Simultaneous dual reading capability
Automatic switch test
Supports square root transmitter
Pulse frequency output for the calibration of flow totalizer

Easy to use
Smartphone-like menu and interface make the operation
simpler and easier
Ultra-compact, size 3.9" x 7.6" x 2.0" (100mm x 192mm
x 52mm), and weight 1.6 lb (0.7 kg)
One handed operation

Calibrated cold junction compensation (Patented)
Cold junction equalizing block in the calibrator
A calibrated PRT element with flexible leads is
installed
in the equalizing block for thermocouple cold junction
compensation
This PRT element can be pulled out from the calibrator
and re-calibrated and corrected at the ice point

Documenting and automated procedure capability
Manage the information of the device under test.
Set up automated calibration procedures, and 223A
performs the test, calculates the errors, displays and/
or stores the results in the memory, and highlights the
out-of-tolerance points.
As-found and As-left functions allow recording and
documenting results for quality control.
Download tasks and upload the results.
Snapshots allow you to capture and save data.

ISO 17025 accredited calibration with data

Built-in temperature readout
CVD coefficients of a calibrated PRT can be input into
the calibrator for accurate temperature measurement.

Multi lingual interface
English, German, French, Italian, Spanish,
Portuguese, Simplified Chinese
(Traditional Chinese, Japanese and Russian are
available per request)

Build-in unit conversion tool
Build-in converters for pressure units, temperature
units, temperature vs. resistance (RTDs), and
temperature vs millivolt (thermocouples)

Warranty: 3 years

HART Communication capability (223A)
Support HART®
 instrumentation

Display
3.5 inch TFT color screen

Misuse protection
Up to 30V voltage on any two sockets and up to
1A current on current sockets will not damage the
calibrator. The calibrator will return to normal condition
as soon as the voltage or current is removed.

Rechargeable battery
Rechargeable Li-ion battery for 15 hours uninterrupted
use.
Battery life will be reduced when 24 V is applied.
The rechargeable battery is replaceable.