Pressure Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20260311

Pressure Controller/Generator

Additel 793

OVERVIEW

The Additel 793 pressure controller combines the latest control/measure technology,

modular design and easy to use/maintenance features into a single users friendly

device. The Additel 793 provides pressure control up to 15,000 psi (1,035 Bar). For

users who require automated production, test, and calibration, Additel has the workload

covered with this pressure controller. The ADT793 accepts one ADT151 dual-range

pressure module in addition to a barometric pressure module. This allows user to

quickly cover a wide range of pressures.

Maximum pressure control range to 15,000 psi (1,035 Bar)

Interchangeable pressure module

Oil and water versions available

Accuracy of 0.02%FS, 0.01%FS or 0.01%RD

Dual-range from -15~3,000 psi (-1~200 Bar ) to 0~15,000 psi (0~1,035) Bar

Control stability 0.005%FS

Ultra-High speed pressure generation and control

No external pressure source required

Control using internal or external pressure modules

Contamination Prevention System (CPS)

(ADT793 optional)

LAN, USB, RS232, and Ethernet communication

External reservoir support

Easy maintenance

Emulation mode

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Pressure Calibration Equipment

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20260311

Contamination Prevention System (CPS) Prolongs the

Maintenance Interval of the Controller

Calibration of DUT’s (devices under test) often introduces contaminates to

a calibration system. Contaminates can cause restrictions in valves, lines

and filters. Additel has included a turn-key solution with the ADT793W to

help reduce these concerns and improve durability and dependability when

calibrating customers devices. The use of an automatic contamination

prevention system and integration firmware allows for purges between

pressure cycles to further reduce the possibility of introducing contaminates

into the system.

Quick Change Pressure Modules (30 seconds)

Additel's 151 pressure control modules can be installed or replaced within

30 seconds or less. Simply open the upper edge of the cabin to open. As

the door opens, the controller will automatically release pressure, providing

the safe removal and installation of the ADT151 modules. Additel offers ve

different pressure ranges for the ADT793 controller. Select between 1035

bar (15000 psi), 700 bar (10000 psi), 420 bar (6000 psi)

350 bar (5000

psi) or 200 bar (3000 psi) with the variety of accuracies to meet application

requirements.

A Singular Pressure Module Design with a Wide Range of

Capabilities

Additel’s 151 pressure modules have been designed with flexibility and

efficiency in mind and can easily be swapped out as needed to meet

changing needs and workloads.Higher pressure ADT151 modules cover

two separate pressure ranges and come with individual calibrations for each

range. This allows for each module to accurately cover a wide range of

pressure workloads. Also, each ADT151 is available in (3) different accuracy

levels (0.02% FS, 0.01% FS and 0.01% of reading) to meet the demanding

needs of our customers.

External Reservoir Support

High volume high pressure calibration work can quickly consume working

media which can increase hands-on time and can be a hassle for laboratory

personnel. The ADT793 supports switching between internal and external

liquid storage tanks, allowing users to quickly connect the large capacity

external liquid reservoir saving time and labor.

20% Pressure Step within 30 Seconds

In the process of efcient and fast-paced production line testing, verication

and calibration, users have strict requirements on the speed of pressure

controllers. ADT793 adopts professional control technology to effectively

improve control rate and stability: control response time (typical) ≤30

seconds, control stability (typical) ≤±(0.003~0.005)%FS

see specications

for more details.

Load Volumn Expander Expands the Loading Volume to 250ml

ADT793 supports reciprocating pressurization through a load volume

expander to expand the loading volume to 250ml, which can meet the needs

of production line users to test multiple UUTs at the same time.

Pressure Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20260311

Pressure Specifications

Model

Specification

ADT793

Pressure Range 0 to 15,000 psi (1,035 Bar)

Precision

[1]

0.008%RD or 0.007%FS or 0.01%FS

Accuracy

[2]

0.01%RD or 0.01%FS or or 0.02%FS

Control Stability

[3]

＜

0.005%FS, typically 0.003%FS

Control Response Time

[4]

＜

30 Seconds

Pressure Type

[5]

Gauge, absolute

Internal Pressure Control Modules 1

External Pressure Control Modules 1

ADT151 Pressure Module

(Max Pressure range)

0~15,000 psi (0~1,035 Bar)

ADT151 Pressure Module

(Min Pressure range)

-15~3,000 psi (-1~200 Bar)

Min Range of External Module -15~1,000 psi (-1~70 Bar)

Range Switching Mode

[6]

Fixed, auto

Pump Source Type

[7]

Built-in hydraulic pump, no external pressure source required.

Control Mode Fast, standard, custom

Maximum Overshoot

＜

1%FS

Maximum Load Volume

<10,000 psi: Max: 80 ml, 50 mL recommend

10,000~15,000 psi: Max: 60 ml, 35 mL recommend

Contamination Prevention System (CPS) Optional

Pressure Port 1/4 BSP M

Built-in Reservoir Volume 800 mL

External Reservoir Extension Optional

Port Filter

[8]

Support

Media

Diethylhexyl Sebacate

（

Only for ADT793);

Deionized water, Distilled water and Pure water (For ADT793W)

[1] Precision: the error components include linearity, hysteresis, repeatability, resolution, and temperature compensation.

[2] Accuracy: the error components include linearity, hysteresis, repeatability, resolution, reference standard measurement uncertainty, annual drift,

temperature compensation, K=2.

[3] In order to achieve 0.003% FS control stability, some additional stabilization time at the desired pressure may be needed depending on the

conguration and pressure level.

[4] The hydraulic pressure is tested under an external load volume 10 ml, 20% step, and the time to reach 0.005% FS stability

[5] Absolute pressure measurements require the optional barometer pressure module (ADT151-BP) to be installed.

[6] Does not support automatic range switching between the internal control pressure module and the external control pressure module.

[7] Liquid refers to Diethylhexyl Sebacate or deionized water.

[8] All pressure ports are installed with 40~100 μm lters.

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Pressure Calibration Equipment

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20260311

General Specifications

Specification Description

Power Requirements

Power supply: AC 100~240 V, 50/60 Hz

Fuse: T3.15A 250V AC

Maximum Power consumption: 150 W

Size /Weight

Chassis Size: 17.32 × 5.23 × 14.96 in (440(W) × 133(H) × 380(D) mm)

Rack Mount Dimensions: 3U-19” rack, Horizontal Direction

Chassis weight: 20.7 kg

Pressure module weight: 0.5 kg

Environment

Operating Ambient: 10 ℃ ~50 ℃

Storage Temperature: 5℃ ~70 ℃

Operating humidity: 5%RH~95%RH, non-condensing

Altitude (Operation): < 2000 m

Ingress Protection: IP20, Indoor use only

Vibration level: 2 g

Impact intensity: 4 g

Warmup Time: 15 minutes

Bare Machine drop height: 250 mm

Conformity CE

Communications

RS232, USB-A*2, LAN

WIFI, Bluetooth, GPIB, mouse, keyboard and other peripheral components can be expanded based on the USB

port.

SCPI Command set is compatible with ADT780, PACE5000/6000, DRUCK DPI520, FLUKE 6270A/8270A/8370A,

FLUKE 7250, Mensor CPC4000/60000/8000, WIKA-SCPI, user customizable

External drive valve port

3-channel external drive valves, green terminal connector with lock.

Maximum driving ability 24 V / 12 W, 30 V max

One channel xed to the CPS pollution prevention device, the remaining 2 channels can be used to control the

external vacuum pump and external isolation valve

I/O Alarm port

3-channel, green terminal connector with a lock

Volt-Free No/Nc relay, the maximum current-carrying capacity: 24 V / 0.5 A, 30 V max

Pressure switch test port

One channel, green terminal connector with lock

Maximum load 24 V / 0.1 A 30 V max

Support mechanical switch, electronic switch testing

Display

7-inch capacitive touch screen, 1280 * 800 resolution, reective panels, black, white background can be user

selectable.

Communication update speed: 10 times per second

Display refresh rate: 5 times per second

Pressure value maximum displays: + 9999999, display digits is adjustable

External pressure control module port

5 pin standard Lemo plug

Connect external pressure control module

（

ADT161

）

Internal pressure control module port

Opening the cabin door will automatically release the pressure for safe removal of modules

Inside of cabin:

For ADT793/793W, 2 bays, from left to right, including a pressure module bay, and a barometric module bay.

Warranty 1 year

Hose & Filter End of Life

The estimated End of Life (EOL) expectancy for all accessory hoses and filters (pneumatic and hydraulic) is

approximately 10 years and should be replaced at the rst sign of wear or damage.

Pressure Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20260311

Internal Module Specifications

Model

Range

Compound Gauge pressure

Precision

[2]

(%FS)

Accuracy

[3][4]

（

% FS

）

1st range

[1]

2nd range

ADT151-XX-GP15K

(0~15000) psi/

(0~1035) bar

(0~6000) psi/

(0~420) bar

0.004

(0.007)

0.01

(0.02)

ADT151-XX-GP10K

(0~10000) psi/

(0~700) bar

(0~5000) psi/

(0~350) bar

0.004

(0.007)

0.01

(0.02)

ADT151-XX-CP6K

(-15~6000) psi/

(-1~420) bar

(-15~3000) psi/

(-1~200) bar

0.004

(0.007)

0.01

(0.02)

ADT151-XX-CP5K

(-15~5000) psi/

(-1~350) bar

(-15~3000) psi/

(-1~200) bar

0.004

(0.007)

0.01

(0.02)

[1] The overload pressure of all pressure modules is 110%FS, and the burst pressure is 200%FS,the burst pressure of GP15K is 130%FS

[2] Precision: the error components include linearity, hysteresis, repeatability, resolution, and temperature compensation.

[3] FS specication applies to the span of the range.

[4] Accuracy: the error components include linearity, hysteresis, repeatability, resolution, reference standard measurement uncertainty, annual drift,

temperature compensation, K=2.

[1] The overload pressure of all pressure modules is 110%FS, and the burst pressure is 200%FS, among which the burst pressure of GP15KM is

130%FS.

[2] Absolute pressure is realized by calculating the gauge pressure and the optional barometric module.

[3] Precision: the error components include linearity, hysteresis, repeatability, resolution, and temperature compensation.

[4] Accuracy: the error components include linearity, hysteresis, repeatability, resolution, reference standard measurement uncertainty, annual drift,

temperature compensation, K=2.

High-precision Compound Gauge Pressure Module Specification

Model Gauge pressure range

[1]

Absolute Pressure

Range

[2]

Precision

[3]

Accuracy

[4]

ADT151-01RD-GP15KM

(0 ~15000) psi

(0~1035) bar

(15~15015) psi

(1~1036) bar

0.008% rdg or 0.004% FS

whichever is greater

0.01% rdg or 0.005% FS

whichever is greater

ADT151-01RD-GP10KM

(0 ~10000) psi

(0~700) bar

(15~10015) psi

(1~701) bar

0.008% rdg or 0.004% FS

whichever is greater

0.01% rdg or 0.005% FS

whichever is greater

ADT151-01RD-CP6KM

(-15~6000) psi

(-1~420) bar

(0~6015) psi

(0~421) bar

0.008% rdg or 0.004% FS

whichever is greater

0.01% rdg or 0.005% FS

whichever is greater

ADT151-01RD-CP5KM

(-15~5000) psi

(-1~350) bar

(0~5015) psi

(0~351) bar

0.008% rdg or 0.004% FS

whichever is greater

0.01% rdg or 0.005% FS

whichever is greater

ADT151-01RD-CP3KM

(-15~3000) psi

(-1~200) bar

(0~3015) psi

(0~201) bar

0.008% rdg or 0.004% FS

whichever is greater

0.01% rdg or 0.005% FS

whichever is greater

Barometric Specifications

Model

[1]

Absolute Pressure Range Maximum Tolerance

ADT151-BP (60~110) kPa ±22 Pa

ADT151-BPH (60~110) kPa ±10 Pa

[1] A barometric pressure module is optional. After inserting the barometric pressure module, the controller can be toggled to and from gauge and

absolute pressure units.

CP Pressure Module with Calibration Fixture

BP Pressure Module with Calibration Fixture

The following tables provide information regarding our ADT151 modular pressure sensors that are designed to easily mount in the front bays of the ADT793

Pressure controller. Our gauge pressure (GP) and Compound pressure (CP) module accuracy specications include linearity, hysteresis, repeatability,

temperature compensation and annual drift, precision specications include linearity, hysteresis, repeatability, resolution, and temperature compensation.

Both the GP and CP style gauges can be zeroed by the controller from time to time to mitigate the effect of zero drift. The specications are valid from

-10°C~50°C. We recommend that these pressure models be calibration annually.

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Pressure Calibration Equipment

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20260311

ORDERING INFORMATION

Accuracy:

01 = 0.01% of full span

01RD = 0.01% of reading

02 = 0.02% of full span

ADT793

Model Number (Base Unit Only - No Pressure Modules)

GP15K

See internal module

specication table

Model:

ADT793

ADT793W

ADT151

Model Number (Pressure Modules)

Note: The ADT793 has two bays for pressure modules. One bay is designated for a BP modules

only and the other bay is for CP and CP modules.

ADT151-BP ADT151-01-GP15K

ADT793 Base unit

BP Module

CP Module

Model:

ADT151-BP (±22 Pa)

ADT151-BPH (±10 Pa)

General Optional Accessories

Model number Description Picture

9050 USB to 232 cable

9055-1 USB to Bluetooth module

9055-2 USB to WIFI module

9053 USB to GPIB adapter

9050-EXT RS232 communication cable

9054

Calibration xture for ADT151

(Including adapter base w/ 1/4BSP male

tting, RS232/power supply

cable, 9V adapter, calibration software)

9245 Rack mount assembly

9055

Green terminal plug

(Drive valve, for I/O)

ADT161

Pressure modules.

External connection with ADT793 can be

used as controlling module.

Selectable range is 1K~15K.

See ADT161 tables for module ranges and

types.

9060

ADT161 pressure modules connection

cable

9241

Replacement gas lled accumulator for

ADT762 and ADT793

9241W

Replacement gas lled accumulator for

ADT762W and ADT793W

9065

High-Precision electrical measurement

module

9029

Pressure switch testing lead kit – for use

with 7xx pressure controllers

9201 Oil, Diethylhexyl Sebacate,1liter (1 quart)

9530-PRO

Additel/Acal Automated calibration software

with asset management, professional

version for single PC

9530-NET

Additel/Acal Automated calibration

software with asset management, network

version, Includes server installation and 1

user license

Accessories (included)

Item Quantity Picture

AC power cord

(10A 250V)

1 pc

Green terminal plug

(For switch test)

2 pcs

O-ring 3.5*1.5 NBR70

（

For ADT151

）

10 pcs

Drain switch valve assembly

(Switch valve + 0.5m × 6mm tube)

1 set

9241

Replacement gas lled accumulator for

ADT762 and ADT793

1 pc

9241W

Replacement gas lled accumulator for

ADT762W and ADT793W

1 pc

Pressure hose for accumulator ination 5

feet

(polyamide, 2,390 psi burst)

1 pc

ADT100-BSPM4-FNG

for connecting with DUT

1 pc

5 feet exible hose, 15000 psi, 1/4BSP

female to 1/4BSP female

(ADT100-HTK-15K-BSPF4-BSPF4)

1 pc

O-ring 4*2 NBR70

（

For ADT100-HTK-15K-BSPF4-BSPF4

）

10 pcs

Sebacate oil (500ml) 1 pc

Adapter, 1/4NPT male to 1/4BSP female

(ADT100-NPTM4-BSPF4)

1 pc

O-ring 5*1.5 NBR70

（

For ADT100-NPTM4-BSPF4

）

10 pcs

Adapter, 1/4NPT male to 1/4BSP male

(ADT100-NPTM4-BSPM4

）

1 pc

Ball-end hex wrench (2mm)

for disassembling accumulator

1 pc

Ball-end hex wrench (5mm)

for disassembling ADT151

1 pc

ADT109-KIT (only for ADT793W)

Contamination Prevention System

1 pc

9084 (only for ADT793W)

External reservior connection components

(Includes 2 pcs 1.5m × 6mm hoses )

1 pc

Filter

Filter for IN port when use External Reservoir

1 pc

ISO17025 accredited

calibration certicate

1 pc

Note: For more optional accessories, please refer to next page.

Pressure Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20260311

Output pressure connections (Optional)

Model number Description Picture

9057 Load Volume Expander

ADT123

Hydraulic manifold

4 ports, 15,000 psi (1,000 bar), with high pressure hose

ADT109-KIT

Contamination Prevention System

External Liquid Connections (Optional)

Model number Description Picture

9084

External reservior connection components

(Includes 2 pcs 1.5m × 6mm hoses )

9230

Liquid level indicator

(For observe the level and rell)