Pressure Calibration Equipment

Corporate Headquarters

2900 Saturn St #B

Brea, CA 92821, USA

Salt Lake City Office

1364 West State Rd. Suite 101

Pleasant Grove, UT 84062, USA

Phone: 714-998-6899 Email: sales@additel.com

Rev # 20230904

The Additel 121 and 123 series pressure manifolds are designed for expanding pressure test ports during pressure

calibration. The Additel 121 pressure manifold is used for pneumatic pressure calibration up to 3,600 psi (250 bar), while

the Additel 123 manifolds is compatible to hydraulic pressure applications up to 15,000 psi (1,000 bar). A lter is built-

in with the 121 pneumatic pressure manifold to prevent contamination introduced by devices under test. There are four

hand-tight quick connectors pre-installed on each manifold. Additel 121 and 123 series pressure manifolds allow you

to connect without the use of wrenches or Teon tape which increases your productivity when using calibration pumps,

pressure controllers, dead weight testers, or piston gauges.

Model Description

ADT121-N 1/4NPT male hose to four 1/4NPT female hand-tight quick connectors

ADT121-N2

1/2NPT male hose to four 1/2NPT female hand-tight quick connectors

ADT121-M

M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors

ADT121-B 1/4BSP male hose to four 1/4BSP female hand-tight quick connectors

ADT121-B2 1/2BSP male hose to four 1/2BSP female hand-tight quick connectors

Pressure Manifolds

Note:

1)A test hose is included with Additel 121 and 123 series pressure manifold.

2)The estimated End of Life (EOL) expectancy for all hoses and filters (pneumatic and hydraulic) is

approximately 10 years and should be replaced at the rst sign of wear or damage.

121 Series Pressure Manifolds

Additel ADT121 & ADT123 Series

Pneumatic, -15 psi to 3,600 psi (-1 to 250 bar)

Model Description

ADT123-N 1/4NPT male hose to four 1/4NPT female hand-tight quick connectors

ADT123-N2 1/2NPT male hose to four 1/2NPT female hand-tight quick connectors

ADT123-M M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors

ADT123-B 1/4BSP male hose to four 1/4BSP female hand-tight quick connectors

ADT123-B2 1/2BSP male hose to four 1/2BSP female hand-tight quick connectors

123 Series Pressure Manifolds

Hydraulic, -15 to 15,000 psi (-1 to 1,000 bar)